Products

Features

• 1,850 GPH at 10 ft. lift
• 12-volt DC sump pump with decades of proven reliability
• Dual float switches for added reliability
• Automatically switches to battery power when AC fails
• Remote monitoring capability with additional PHCC Pro Series CONNECT Modules allow you to receive real time alerts
• USB Data Port and Remote Terminals connect to external devices such as PHCC Pro Series CONNECT Modules, home automation systems or other devices for remote notification
• System pumps intermittently for days
• Recharges battery automatically
• Designed for use with maintenance or maintenance free batteries
• 3 Year Warranty
• Backup will assist primary pump if excessive amounts of water are entering the sump pit
• Accommodates up to two (2) B-2200 batteries for 100 hours of pumping (Based on 10%y cycle. Run times may vary based on inflow of water)

Features

• 2,400 GPH at 10 ft. lift
• 12-volt DC sump pump with decades of proven reliability
• (2) Caged dual float switches for added reliability
• Automatically switches to battery power when AC fails
• Remote monitoring capability with additional PHCC Pro Series CONNECT Modules allow you to receive real time alerts
• USB Data Port and Remote Terminals connect to external devices such as PHCC Pro Series CONNECT Modules, home automation systems or other devices for remote notification
• Backup will assist primary pump if excessive amounts of water are entering the sump pit
• System pumps intermittently for days
• Can run directly on AC power and battery power
• Automatically switches to battery power when AC fails
• Recharges battery automatically
• Designed for use with maintenance or maintenance free batteries
• Accommodates up to two (2) B-2200 batteries for 100 hours of pumping (Based on 10%y cycle. Run times may vary based on inflow of water.)
• 3 Year Warranty

Features

• Corrosion-resistant, powder coated epoxy finish
• Durable, cast iron construction
• Cast iron switch case, motor, pump housing and base
• No sheet metal parts to rust or corrode
• All castings are cast iron class 25-30 25000# tensile strength
• Stainless steel screws, guard, handle, arm and seal assembly
• Float-operated 2-pole mechanical switch
• Permanent split capacitor motor, oil-filled and hermetically-sealed, automatic reset thermal overload protection
• Bearings - upper & lower oil-fed cast iron
• Carbon and ceramic shaft seal
• Entire unit pressure-tested after assembly
• Watertight, neoprene square ring between motor and pump housing
• Maximum temperature for effluent or dewatering: 130°F (54°C)
• Passes 1/2" (13 mm) spherical solids
• No screens to clog
• 1 1/2" NPT discharge (1 1/2" x 2" PVC adapter included with BN & BE Models)
• On point: 9 1/2" (24 cm) / Off point: 3" (8 cm)
• Major width: 10-1/8" (25.7 cm) / Major height: 12" (30 cm)

Features

• Cast iron switch case, motor and pump housing
• Engineered thermoplastic base
• Engineered, glass-filled, plastic impeller with metal insert
• Stainless steel guard and handle
• Lower and upper bearings, oil-fed cast iron